Free 3D male body models in GLB, for tattoo design
by moiraiDigital · updated
These are 15 of the male plaster casts in plan.tattoo, free to download as GLB files. The six sizes of the multisize man (S to 3XL) are CC0 and modelled in metres. The other nine are CC BY 4.0 downloads from Sketchfab that we cleaned up, so they need a credit. Each file is under a quarter of a megabyte, because the meshes are Draco-compressed.
You can also try a design on these casts without downloading anything: open the planner, type a size in centimetres and turn the body.
What you get
Every file is the plaster cast the planner loads when you pick that figure: the body shape alone, without textures, clothes or a skeleton. The multisize man is one MPFB body built at six weights. He is 178 cm tall in every size, so a design on him keeps its size from S to 3XL. The other casts run from a lean build to a bodybuilder, and three hold a pose (leaping, a boxing guard, head bowed). male-scan is a 3D scan of a torso, cut at the neck and thighs.
The planner also has female figures, including a curvy woman in the same six sizes, free at plan.tattoo/app.
The models
"Height in the file" is the tallest extent of the mesh, in whatever units the file uses. "Height in the planner" is the real height we give the cast so that typed centimetres come out true. For the Sketchfab casts we estimated it from the pose. Divide it by the file height to get the scale factor.
| File | What it is | Size | Height in the file | Height in the planner | Licence and credit |
|---|---|---|---|---|---|
| man-s.glb | multisize man, S | 0.22 MB | 1.77 (metres) | 178 cm | CC0, made with MPFB; no credit needed |
| man-m.glb | multisize man, M | 0.22 MB | 1.79 (metres) | 178 cm | CC0, made with MPFB; no credit needed |
| man-l.glb | multisize man, L | 0.22 MB | 1.77 (metres) | 178 cm | CC0, made with MPFB; no credit needed |
| man-xl.glb | multisize man, XL | 0.22 MB | 1.78 (metres) | 178 cm | CC0, made with MPFB; no credit needed |
| man-2xl.glb | multisize man, 2XL | 0.22 MB | 1.78 (metres) | 178 cm | CC0, made with MPFB; no credit needed |
| man-3xl.glb | multisize man, 3XL | 0.22 MB | 1.78 (metres) | 178 cm | CC0, made with MPFB; no credit needed |
| male-lean.glb | standing man, lean build | 0.09 MB | 1.81 | 178 cm | Male Base Model by gome70, CC BY 4.0; changed as below |
| male-athletic.glb | standing man, athletic build | 0.22 MB | 1.96 | 178 cm | Male anatomy figure by C.J..Goldman, CC BY 4.0; changed as below, and decimated from 320,954 to 150,000 triangles |
| male-strong.glb | standing man, strong build | 0.22 MB | 173.2 | 180 cm | Male Human Strong Body by Orthovasky, CC BY 4.0; changed as below, and decimated from 1,260,230 to 150,000 triangles |
| male-muscular.glb | standing man, muscular build | 0.22 MB | 1.90 | 182 cm | Handsome Male Basemesh by BIGE, CC BY 4.0; changed as below, and decimated from 254,210 to 150,000 triangles |
| male-bodybuilder.glb | standing bodybuilder | 0.05 MB | 2.00 | 180 cm | Bodybuilder by 3dUVpro, CC BY 4.0; changed as below |
| male-leaping.glb | man in mid-leap | 0.22 MB | 7.61 | 184 cm | Male human body by Izaskun_Arraiz, CC BY 4.0; changed as below, and decimated from 173,389 to 150,000 triangles |
| male-guard.glb | man in a boxing guard | 0.04 MB | 505.8 | 175 cm | Free Rigged Male Basemesh by Filip, CC BY 4.0; changed as below, and skeleton removed |
| male-head-bowed.glb | standing man, head bowed | 0.21 MB | 1.79 | 176 cm | male anatomy sculpt 1 by bhagath2005, CC BY 4.0; changed as below, and decimated from 245,412 to 150,000 triangles |
| male-scan.glb | 3D scan of a styrofoam male torso, neck to thighs | 0.24 MB | 870.9 | 87 cm (neck to thigh cut) | by CreativeTools on Sketchfab (source link on our credits page), CC BY 4.0; changed as below (its 28 pieces joined), and decimated from 2.5 million to 160,000 triangles |
Changes we made to every Sketchfab cast: textures and UVs removed, parts joined and welded, turned to face the front, Draco-compressed. Quote this line with the credit.
Licences: what you can do with them
The six multisize files are CC0. MakeHuman's licence page says its core assets, which MPFB also uses, are shared under CC0 and that you are "free to do as you see fit" with them or anything derived from them, without paying, adding a copyright notice or giving credit. Our six sizes of the man are MPFB output, so they carry the same terms. Creative Commons' CC0 deed says this covers commercial use without asking permission. You just shouldn't suggest the author endorses what you made.
The nine Sketchfab casts are CC BY 4.0. You can use, share and change them for any purpose, commercial work included. The CC BY deed asks for three things: credit the creator, link to the licence, and say what was changed. The table and the line under it give all three. If you change a file yourself, list your changes after ours. The credit is owed to the original authors; you don't need to credit us.
The format: GLB, Draco, metres
GLB is the binary form of glTF, the Khronos Group's royalty-free format for moving 3D models between programs. The glTF 2.0 specification says linear distances are in metres and +Y is up, with the front of a model facing +Z. Every cast here faces +Z.
The metres rule only holds if the person who made the file followed it. The multisize man does: we built him at 1.78 m. The Sketchfab casts kept the units their authors used, so their heights in the file run from 1.79 to 870.9. The planner rescales each one by the height in the table. In your own software, scale the file by that height divided by its height in the file.
The meshes use Draco compression, the KHR_draco_mesh_compression extension. That is why a 150,000-triangle body comes in at 0.22 MB. A program needs a Draco decoder to open them. Blender and three.js both have one.
Opening the files
In Blender
Use File › Import › glTF 2.0 (.glb, .gltf). The add-on ships with Blender, so there is nothing to install. We opened man-m.glb and male-lean.glb in Blender 5.2 and the importer decoded the Draco meshes on its own. Blender is Z-up, and the importer turns the cast upright for you. From Blender you can save the body as OBJ, FBX or STL for programs that don't read glTF.
In three.js
GLTFLoader hands Draco meshes to a DRACOLoader. Make one, point it at the decoder files with setDecoderPath, and give it to the glTF loader:
const draco = new DRACOLoader();
draco.setDecoderPath('/draco/');
const loader = new GLTFLoader();
loader.setDRACOLoader(draco);
loader.load('man-m.glb', (gltf) => scene.add(gltf.scene));
Using them for tattoo mock-ups
The casts suit placement and size studies, such as how far a design runs round a forearm or where a back panel stops. The multisize man keeps MakeHuman's UV map, so you can paint a design into a texture or use it as a decal guide. The Sketchfab casts had their UVs removed with their textures. Unwrap them first, or use a method that needs no UVs, such as projecting the design onto the surface from a camera. Projection stretches wherever the body curves away from the projector, so check it from the side.
Then there is size. A flat image of 10 cm laid round a curved arm covers less than 10 cm of width, seen from the front. Fix the scale first, then measure along the surface as a tattoo artist would with a flexible tape. Our tattoo size chart gives typical sizes for each part of the body, and tattoo placement covers how each area takes a design.
Using the same casts in the planner
The planner skips all of this setup, free in any browser. Add your design and type its size in centimetres; it wraps over the cast, measured along the surface. Turn the cast, change the multisize man's size (the design moves with it), move the light, and save a picture without an account. It shows size and placement, not your own skin tone or body shape. The 3D tattoo visualizer guide walks through it, and plan.tattoo vs Try Tattoo 3D compares it with the other browser tool that offers body models.
Questions
Can I use these 3D body models commercially?
Yes. The six multisize man files are CC0, so you can use them for anything, commercial work included, with no credit. The nine Sketchfab casts are CC BY 4.0, which also allows commercial use as long as you credit the original author, link to the licence and say what was changed. The table on this page gives that credit for each file.
What scale are the models in?
The multisize man is in metres, as glTF expects, and stands 1.78 m in every size. The Sketchfab casts kept their authors' units, so their height in the file ranges from 1.79 to 870.9. Scale each one by its height in the planner divided by its height in the file, both given in the table, and apply the scale before you measure.
Can I get the models as OBJ or FBX?
They are offered as GLB only. Import a file into Blender with File › Import › glTF 2.0, which decodes the Draco compression, then save it in the format you need, such as OBJ, FBX or STL. Programs that read glTF directly can open the GLB as it is if their reader includes a Draco decoder.
Can I use them to design a tattoo?
Yes, for placement and size. Set the scale first, then lay the design over the body and measure along its surface. The multisize man has a UV map, while the other casts need unwrapping or a projection method. Or open the same casts in the plan.tattoo planner, free in a browser, where a design takes the size you type and you can turn the body to see every side.
Sources: Creative Commons: CC BY 4.0 deed · Creative Commons: CC0 1.0 deed · MakeHuman Community: licence · Khronos Group: glTF · Khronos: glTF 2.0 specification · Blender manual: glTF 2.0 · three.js docs: DRACOLoader